MRV Communications LX-4000 Series Technical Information PDF herunterladen (Seite 62)

100

101

Performing the Initial Setup

Installing and Configuring the RADIUS Server on a Network-Based Host 2-21

5. Use the radius primary authentication server port

command to specify the socket your RADIUS server is

listening to.

Example AAA:0 >>radius primary authentication server

port 1645

6. Use the radius source interface command to specify

the source address the LX sends when contacting the

RADIUS server.

Example AAA:0 >>radius source interface 3

7. To verify the LX RADIUS configuration, execute the

show radius characteristics command.

Example AAA:0 >>show radius characteristics

See Table 2.1, “RADIUS Settings,” on page 2-22 for descriptions

of all of the settings that you can specify for a RADIUS server.

In order to use a RADIUS primary accounting server, or a

RADIUS secondary server, you must specify an IP address and a

secret for the respective RADIUS server. For examples of the

commands that you would use, see the following sections:

• “RADIUS Primary Accounting Server Commands” on

page 2-23

• “RADIUS Secondary Accounting Server Commands”

on page 2-23

L The use of a RADIUS primary accounting server, and

the use of RADIUS secondary servers, is optional.

After you specify the RADIUS settings for the RADIUS primary

authentication server, you can configure the RADIUS primary

accounting server and the RADIUS secondary authentication

and accounting servers.

The LX listens to

port 1812 by

default.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 691 692

Kommentare zu diesen Handbüchern

Keine Kommentare

MRV Communications LX-4000 Series Technical Information Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server MRV Communications LX-4000 Series